Orlando Shutters Organization-An Analysis

¬†Plantation shutters are available at practically any price point. How do you tell the difference between high-quality and low-quality shutters if you’re not a shutter expert? Before making a decision, consider a variety of considerations when comparing plantation shutters. We’ll show you how to tell the good from the bad in this article.Learn more about us at¬† Orlando Shutters Organization

Only wood plantation shutters will be discussed, as shutters made of MDF, composite, and polymer materials are so unlike in design and construction from wood plantation shutters that meaningful comparisons are difficult.

How to Tell the Difference Between High and Low Quality

To demonstrate the distinctions between higher and lesser quality shutters, let’s compare two common plantation shutter panels. Consider the following dimensions: both panels are 12″ wide by 21″ height. They’re built of the same Basswood and have a 3-1/2-inch diameter “Louvers are a type of shutter. Despite the fact that these features are same, the design, structure, and components of the imported and custom-made shutters varies significantly.

A Better Fit With Your Window Is A Result Of Good Design

The number of louvres and the overall louvre area are the first differences between these two shutter panels. A higher-quality shutter has five louvres, but a lower-quality shutter only has four. The reason for this has nothing to do with aesthetics and everything to do with the shutters’ design. The first is a true custom-made shutter that was developed and constructed for a specific window, while the second is referred to as “cut-to-fit.”

The single most essential criterion in determining a shutter’s quality is the design difference. This is why:

Lower-quality shutters are created to set measurements by the factory; in this case, the heights of the shutters are created in 3-inch intervals. As a result, the plant produces shutters in the following sizes: 18″, 21″, and 24″ “long. If none of these dimensions exactly match the specifications of your window, the U.S. distributor will order the next size up and cut it down to fit your window. This necessitates the use of taller rails and broader stiles in the shutters so that these elements can be trimmed down. The outcome is a shutter with a larger proportionate area of stiles and rails and a smaller area of louvres for most clients. A smaller number of louvres means less light and a more limited vision.

The higher-quality shutter, on the other hand, is made to fit the window from the start. Each shutter is custom-made to fit the dimensions of a single window in your home. In this way, it’s similar to a suit that’s been custom-made for its owner from the fabric selection through the final fitting. As a result, the shutter is more balanced, and the window is brighter and airier. While the cut-to-fit method is less expensive, even a casual observer may see the overall inferior quality.